Anybody got a wire pinout from a Midtech control vavle and flow meter to a Ez boom? Sprayer is non supported, I have the 5 section boom vavles working good, but still have the Midtech controller in it, I wired the control valve and flow meter as I thought it should be and no workie. So I put the Midtech back in for now. has a control vavle that bypasses back to pump when not in use, four wire, (12 volt power, ground, and I assume a inc/dec.) and a three wire flow meter? could not get flow or control to work? Midtech 6000 controller if I remember right. |