|
North west MN | When calibrating the t2 controller make sure you mark the wheels and line up perfect after turning around. I think what your seeing is that the EZ-Steer t2 controller might not be calibrated just perfect. I see this allot and I just move the antenna to compensate if it can't be fixed by re calibrating the controller. With an autopilot system you can adjust the roll cal number to center the tractor but the EZ-Steer you cannot but Like I said I have been just moving the antenna to center the tractor. To get the tractor centered I would suggest doing it without an implement and make an AB line drive with it engage and online on dirt that you can see your tracks come back on the same AB line and see if you follow the same tracks if you are off center move the antenna and repeat until the tractor is centered. Once you know the tractor is centered mark where the antenna is so you can put it back in the same place. | |
|
ez steer 500
