|
| After a little more research - I found that there are two official ways to do what you are wanting to do. The best way I can help you is to direct you back to the EZ-Guide website, click on support, go to the 250 support page, click on documentation, and then look at the "Cabling guide". You can download it for free and print it out or read it in Adobe Reader. Then go to pages 30 and 31. They will describe exactly how to do what you want to do. If you choose to use the first method with the original power cable, you will need to be willing to work on the Duetsch connector (not that hard, but not necessarilly plug and play either). Good luck.
Again, email if you have specific questions.
Joe | |
|