Looking to put steering on a mid 90s ford floater truck currently have a cruizer in it think its a 2 I would be willing to upgrade to an envisio. Can the smartrax attach to steering wheel? Talked to salesman briefly he said as long as it has a 3 spoke steering wheel it will work, but after looking on ravens web site (which doesn't give much help) I'm not sure now. Otherwise what is a good system to run that will handle higher speeds?
Posted 2/23/2015 05:39 (#4406770 - in reply to #4406496) Subject: RE: raven smartrax md question.
most likely it would, I don't know what the number of spokes a wheel, has got anything to do with it fitting or not. basically how it works is that there is a adapter that installs between the steering wheel shaft, and steering wheel, the gear plate fastens to this adapter. so basically you are concerned with shaft diameter and number of splines, also there may be some steering column clearance considerations.
Posted 2/23/2015 08:38 (#4407090 - in reply to #4406496) Subject: RE: raven smartrax md question.
Yeah, I'm sure that the salesman was thinking SmartSteer rather than MD. If you know the shaft diameter and the number of teeth on the spline, there should be one that would work. I see the following spline types available: