|
Wood Lake, MN | Last week I had ordered the PF90350 cable to get GPS into my pro600.
Picked up the cable today. Dealer said the cable will T into my existing cable.
So I did that and I still couldn't get a GPS signal into the pro 600, so I hooked up my laptop to the cable and no signal either. Took a closer look at the cable, the number on the cable was PF80754, Then looked at the 2 connectors on the T harnes, the one connector had pins in 3 and 10 ( I was told Pin 3 was TX pin 10 was RX) and the other connector did not have those 2 pins in. My itc receiver has 2 connectors coming out so I hooked the T harness connector with 2 additional pins up to the receiver and left the other connector on the T harness unhooked and now I have GPS signal.
On the box the cable came in it says PF90350, so did the wrong cable get put into the box?
went to jdparts and typed in PF90350, comes up as invalid part number. So typed in PF80754 that was a valid part# and the price was $325!!!! I only paid $134 for the supposeldy PF90350.
So is John deere not makeing the PF90350 anymore and replaceing it with the 80754 and charging almost triple for it?
Edited by jasonswmn 4/10/2008 07:35
| |
|
PF90350 made anymore?
