AgTalk Home
AgTalk Home
Search Forums | Classifieds (132) | Skins | Language
You are logged in as a guest. ( logon | register )

9610 Beater and Grate
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
DevinF
Posted 7/27/2006 09:57 (#30277 - in reply to #30114)
Subject: RE: 9610 Beater and Grate


I am putting a new concave in 9600. JD guy told me to look at the square bushings the beater rides up and down on.
I wasn't going to but noticed the rod that connected the beater to the concave was worn 2/3 through. Pulled it out and the square bushings had holes in them. My grate was all busted to hell, with one slat clear gone and a couple others broken and bent.

I priced a new one at 600 dollars. We decided to weld it up instead of getting a new one.

Definately check the rod and the square bushings at the top they will need o be changed.


Devin
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)