Near Intersection of I-35 & I-90 Southern Mn. | Yes a PF3000 could be put in the combine by installing the various components from a PF3000 combine kit.
I assume you are asking if the PF3000 can use the components which were used with the Insight. The answer is mostly NO. The Insight is a CAN based system where three modules (Flow, Mositure, Speed/Head height) communicate back and forth to calculate the yield etc.
The PF3000 is not CAN based and all the calculations are done within the PF3000 box itself.
The Mositure sensor itself is the same in both cases but with the Insight it is connected to the moisture module which is attached to the combine close to the moisture sensor.
The harnesses are completely different.
Edited by tedbear 4/2/2008 05:56
|