AgTalk Home
AgTalk Home
Search Forums | Classifieds (10) | Skins | Language
You are logged in as a guest. ( logon | register )

Pro 600 ? for torn
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
PB from Oz
Posted 4/2/2008 20:01 (#348444 - in reply to #348061)
Subject: Re: Pro 600 ? for torn


You will have to set the output settings on the Outback and also the input settings on the Rinex & Pro600 (most likely you will only need to set the baud rate on the Rinex & Pro600)

You will be fine to split the serial cable. Serial signal degrades mostly due to the length of the cable so you will not have a problem.
Main thing to remember when splitting a serial cable if making one your self is that you can't connect two transmit (TX) lines together. So you want TX from outback to RX on RINEX and Split to RX on Pro600 and connect the Ground pins.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)