|
| I only have experience with an ez-guide 500 and ez-steer system on WAAS. I have no RTK or tile plow experience. I am looking at setting up a tile plow. I've done a couple searches on this and this is what I've come up with. Am I on the right track?
1. I was planning on using an outback A321 as a base.
2. Use an A320 as the rover.
3. An older intellislope or integra with intellislope or FM 1000 with WM-Drain. If I go the Trimble route would I need a Trimble base and rover? Leaning towards the older intellislope to keep the budget down and really don't need another display. Still haven't decided which one.
4. A control valve on the plow. Would this normally go with a used plow?
Haven't got a plow yet. Leaning towards a Waynes mounted on a MT855B if that makes any difference. Just trying to get my head around everything before I jump. How much should I budget for this? Would $15k be enough? Not particular on brand or new/used. Am I missing anything? Sorry for all the questions just in unfamiliar territory. Thanks. | |
|
Newbie question. What do I need for a tile plow control system?
