|
MID-MISSOURI | When plugged into the serial port on the bottom of the display, we have it set on RS232B. We have also plugged it directly into the harness between the 600 and the planter with an adaptor. We have tried all four settings in the 600 (CAN A, CAN B, RS232A, & RS232B) with the RS232 plugged into both locations. The IH tech is going to try hooking up his own Receiver to make sure his side of the system is working the first part of the week. If everything on his end is working then I guess I will try the PF90350.
Thanks Folks! | |
|
|