|
MN | Your 8210 probably has a field installed greenstar harness. The seedstar connector at the back of the tractor must be clean there has been problems with that connection at times. Also if it is a field installed harness there are two parts, the cab harness and the implement harness. The implement harness when installed gets its power from plugging into the three pin round AMP convenience outlet. All of the harnesses I have installed I hard wired in but you might have a three pin connector laying under your armrest that needs to be plugged in to get power to that iso connector to power your seedstar controllers because there is no programming that you need to do on the display it is a plug and play system. Hope you figure it out. | |
|