|
| I have just finished installing an Ag Leader Seed command with Tru count Air clutches on our 1770NT. I ran through the quick configuration sheets that came with the kit to set the sections and such and went through the Implement set up and the veichle set up. I set up the GPS to 5 Htz. Is there anything that I need to do to configure this Switchbox thing or was it configured when I did the planter sections set up. What else do I need to do before I actually test it out, waiting for the ground to firm up for that. Also any tips on where to mount the Ag Leader implement switch since we have bought it already. I think I can make it work on the main lift wheel bracket with the switch tripping on the main frame. The switch will be mounted straight vertical if that makes a difference. Any help would be appreicated, we are new to this stuff and trying to learn as much as we can. Sorry for the long post and thanks for the advice. | |
|
Seed Command Set Up?
