|
Denmark, Northern Europe | I have experienced about the same.
In my JD7820. When I was right on the marker line my eg500 told me to Move a little. It was only 2-3". I had to recalibrate the T2 unit. and it solved the problem.
The override thing can be a very simple thing. Last week I was mounting the EZ-steer bracket on the columm in my 8410. When I engaged the EZ-steer it told me the same override thing as you. You might be laughing now, it turned out that the 4 nuts holding the brachet where too tight. I loosened them and the problem was solved.
| |
|