|
|
Central GA | Trying to set up a Field IQ on a 750 on a dry spreader buggy. I am using a Dickey John PWM valve and can't figure out what the PWM settings are for it. The Auto Tune does not complete its cycle. There is a possibility that the tractor has low flow on the hydraulics (old 7410). Any help on the intial PWM settings would be great. I have the freq set 200hz but I have no idea what to plug in for the myriad of other settings. I assume auto tune resolves some of those. As usual, trimble has minimal support- I can't even find a recent field IQ manual.
TIA |
|
| |
|
| Try looking here.
Attachments
----------------
 Ag_SprtNote_FIQ_SprayersSpreaders_15015.pdf (457KB - 1041 downloads)
|
|
| |
|
| Did you buy this from a dealer? Trimble support is handled by their dealers, independents or CNH based. I would suggest contacting a local knowledgable dealer for assistance.
Trimble did not sell this to you, but they do train there dealers that choose to sell their products.
Edited by FRMLPLR 1/25/2014 13:54
 (image.jpg)
Attachments
----------------
image.jpg (28KB - 369 downloads)
|
|
| |
|
| Which valve do you have. The only DJ PWM valves that I am aware of are either 4 or 8 GPM. Those seem like very small valves to me. Dickey-john has excellent phone support. 800-637-3302 Dickey-john makes some of the Trimble CAN nodes, it is possible that they have information on the Field IQ.
|
|
| |
field iq/750 and DJ pwm valve settings
