AgTalk Home
AgTalk Home
Search Forums | Classifieds (42) | Skins | Language
You are logged in as a guest. ( logon | register )

SiteMate VRA feed delay for Loral AirMax V
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Applicator
Posted 2/27/2008 09:32 (#320698 - in reply to #319906)
Subject: Re: SiteMate VRA feed delay for Loral AirMax V


Feed delay will help this. If everything is tight, I would start with 2 seconds minimum. If you have a servo valve system, it would be a good idea to run an auto gain cal with the Land Manager. This will allow the Land Manager to correct for slop/wear, etc in the servo system. The lag you see in the maps is probably not as bad as the on the real ground lag. You have the time fert takes to drop to the tubes and then be blown through that can not be by timed by any controller.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)