|
SE Nebraska | Replacing an Micro-Trak MT3000 with something with a serial port to VRA NH3 in pivot corners. Already have a computer running Farmworks software to VRA and log. Also will use it for liquid app that will not be VRA. Plan on connecting it to a Rinex boom section control when used with liquid. I would like to use the old NH3 cooler from Micro-Trak. Would I be able to adapt the Raven to control the NH3 cooler that I have. On the Micro-Trak 3405 II you can change the control voltage to the servo valve (from 12 volts to 8 volts) to control the old NH3, is the Raven capable of this?
Oh and the Raven looks to be about $450 more.
Good and the bad from both controllers? Thanks. | |
|
Micro-Trak 3405 II or Raven SCS 4400?
