Viewing a thread - Insight Mounting - 8000 Series Deere Tractors

Forums | Classifieds (15) | Skins | Language

You are logged in as a guest. ( logon | register )

Insight Mounting - 8000 Series Deere Tractors	View previous thread :: View next thread
Forums List -> Precision Talk	Message format

esystems

Posted 7/3/2006 14:16 (#23755 - in reply to #23669)
Subject: RE: additional thoughts

NW Ohio

Ron,
I am liking what you did on the 3 point hitch for protecting the wiring harness, etc.
We got by with my setup, but I was not real comfortable about it.
I will have something like your next season.
Also included some cab pictures of what I came up with for organizing the cab. I made my own bar from corner post to corner post for most of the monitors. From the front, MicroTrack FlowPro, Rawson, White seed monitor, White planter controls. Then in the right rear corner post, the 2 way radio on top, with the FarmWorks Titan hanging on a Ram mount. The ram mount is fastened to a stud bolt that tightens into the mounting on the corner post. I use this stud bolt into a welded on nut on all the other applications that I use the Titan. Such as 4 wheeler, sprayer.
Ted, I agree that getting the Titan or Insight up above helps with the glare. Also being able to fine tune the angle of the screen to your eyes, with a Ram mount is very helpful.