|
NC Iowa | Thank you for all your replies. I think I have the liquid application figured out. We are planning on purchasing the Rate controller and the swath control. Hopefully I will be able to figure out how to make the swath control work with a 3rd party spray bar to have 4 boom sections on an 80' bar. We are using strip till/ no till and that would allow the sprayer and planter to drive on the same path.
I will keep working on the dry application, we will need to buy a new Rawson Accu rate controller with the serial port to connect to the GS2. On our strip till unit there are 2 augers that feed the 16 rows, hopefully I will be able to get the swath control to work on the strip till unit also, this way when we are ending a field the GS2 would recognize overlap and would be able to switch off 8 rows using a clutch and then would not double cover and not double count acres. I have till fall to figure the dry out.
Thanks again.
Chad | |
|