Central To Everything and Close to Nothing | Any GIS program that will accept incoming GPS information will work with your iTC. Of course, you will need the interface cable to do this. The only hitch with doing this with an iTC is that it will need to be SF2 with an active license or RTK. Otherwise you will need a original display and mobile processor hooked up for it to work. If you have an SF2 iTC with an active license, you can use the StarFire Desktop Configurator which is available on Stellar Support, which will allow you to configure the receiver for the correct baud rate and NMEA information.
Hope this helps!!
Seasons Greetings |