AgTalk Home
AgTalk Home
Search Forums | Classifieds (55) | Skins | Language
You are logged in as a guest. ( logon | register )

Using an FMX 1000 to control Teejet system.
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Trimble Man
Posted 7/12/2019 05:02 (#7610044 - in reply to #7610036)
Subject: Re: Using an FMX 1000 to control Teejet system.


Since this post, Trimble have released a Field IQ kit for Hardi. If your sprayer has the 2 wire reverse polarity boom valves, then you would have to use this kit. All you would need to add is a flow meter. If your sprayer has solenoid valves, or something different, you would need to look at a more generic Field IQ kit. The 99104-27 Hardi FIQ Kit mounts the RSCM on the sprayer itself and includes a 20ft harness back to the tractor. You will need a powered cab kit to run it. If you are using the 750 Display, you will also need a 12 section switch box, which is optional on the 1000, since the booms can be switched via on-screen softkeys.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)