AgTalk Home
AgTalk Home
Search Forums | Classifieds (137) | Skins | Language
You are logged in as a guest. ( logon | register )

Using an FMX 1000 to control Teejet system.
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
NithField
Posted 7/12/2019 04:36 (#7610036 - in reply to #2902470)
Subject: Re: Using an FMX 1000 to control Teejet system.


Paris, Ontario Canada
Hi Ross,

I am looking to set up an older hardi ranger via field iq. This sprayer has no FlowMeter, just a three section valve bank, running the Hardi 39 pin connector to a spray 2 box.

From your experience what is the best set up for the following to update the system to have swath and rate control via a 750 or fmx 1000. we currently have a Field Iq harness open to use.

Flow Meter
3 Section Valve Bank
Does it need a regulator valve?
Control Valve replacement?

I assume that the 460 raven plug... 16 pin... do you have the pin out for that harness to go to all the components?

Any help would be great, lots of opionions on the site... not alot of experience.

Thanks,
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)