|
| Coleman sells a "comercial quality" gun for about $40. It is a cheap knock off of an expensive Binks Model 7. It would work OK for what your doing. Like said alaready, a DA sander works good to just remove the chalky surface. A wire brush on a grinder is the best way to go if you want to strip paint. that is not needed. As far as paint types the sky is the limit. Cheap custom mixed auto paint starts at about $100/gallon(watch the recoat window on the Omni line). TSC paint is cheap, but fades quick. Buying the correct paint from the wagon manufacturer is most likely the best way to go. | |
|