bhageman - 11/30/2012 20:55I would say you could fix it pretty easy. Just remember that the hydro pump and motor are a set. When you replace one you have to replace the other one at the same time. You might want put a set of gauges on and trouble shoot it a bit before you start throwing 7 grand worth of parts at it. I have seen it to many times where people just start changing parts and it ends up something stupid like a relief valve. They have had it on the gauges and switched some valves around I'm guessing it must be the relief valves still can't say for sure what's wrong but that's good to know about the pump and motor |