|
|
Sumner County Kansas "The Wheat Capital" | Just upgraded to a 750 from a Raven Cruiser. Bought the cables as was told but not able to get speed to readout on the 440 console. Do I need to change Speed Calibration or what? |
|
| |
|
Winnipeg, MB | First make sure that you have the radar adapter cable plugged into port A on the back of the 750. To enable the radar output on the 750 from the home screen hit settings then system then advanced. In the advanced menu hit digital output. In the next screen it should say digital output mode and then disabled. Hit that button then select radar. Once radar is selected under the Digital output mode is now a frequency. Set that to 60hz and the speed cal on your raven should be set to 600. You may need to adjust the raven speed cal up or down a little bit to make the speeds match correctly. |
|
| |
|
Sumner County Kansas "The Wheat Capital" | Thanks, it worked perfectly. |
|
| |
Trimble 750 to Raven 440 speed?
