AgTalk Home
AgTalk Home
Search Forums | Classifieds (31) | Skins | Language
You are logged in as a guest. ( logon | register )

JD2510 Hydraulic system
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
msb
Posted 6/14/2006 09:10 (#19397 - in reply to #19371)
Subject: RE: JD2510 Hydraulic system


Lapel, In
There is a suction screen.Its located just behind the filter.Should be a square plug of sorts.I forget on the 2510 if it takes a breaker bar or what.Drain the transmission first.Screen is about 15-18 inches long.It pulls right out after the plug is removed.If its full of crud then your brake lining are probably coming apart.There is also a small screen inside the pump valve housing,but check the suction screen first.The 2510 pump did not have quite the capacity of the 3020,but it should be more that adequate to run a sprayer.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)