North West IA/western AZ | JAR - 7/5/2012 07:09
Buster 50,
Do you conventionally till after you apply manure? It would be very easy for the 20/20 to work for you in this scenario.
Or do you try to plant behind the applicator without tillage. This would definately be a more challenging scenario for the 20/20.
Either way, the 20/20 will work for you.
The most important feedback from 20/20 AirForce is the information provided by the weigh pins. If you monitor feedback from the weigh pins, you will know if adjustments are required.
Good luck,
Jay
No tillage after application. My concern with the Air force is the time lag needed for the air compressor to work, and the possobility of getting one weigh pin row on the old wheel track giving a higher down pressure for the whole planter. Thanks for the reply. |