|
| I have a raven 300 reciever that is using omnistar hp signal that eventually gives me a diff 5 on my auto steer (topcon x-20). When I first fire up my reciever it goes from diff of 1, then to a diff of 2, then to a diff of 5. I can get yield mapping on my greenstar display when the diff is 2, but when it switches over to a diff of 5 I loose mapping capability. My greenstar display does not reconize the diff 5 format. All the right info is going into the display but for some reason deere's display chooses not to work when I have a real good diff signal for accurate steering. Just wondering if any body else has got any ideas or if any body else ever had the same problem. Any help would be greatly apprciated! | |
|