|
SE Saskatchewan Canada | The voltage error is "low voltage" and then it shows the current volt level which has never been lower than 13 and usually in the 14 range? As this is a continuing warning, you can remove it from the main display by touching reset however the warning icon continues to glow and after 10 minutes it buzzes and comes back onto the display showing the current volt level which is always high. To me it is like a parameter within the ICU is not being logical?? Running with all lights and electical equipment there continues to be over 13 volts available.. The service tech that worked on it indicated they reinstalled current software into the ICU but did not change anything? | |
|
|
Remove error code on T9040 NH, 2008 model
