AgTalk Home
AgTalk Home
Search Forums | Classifieds (9) | Skins | Language
You are logged in as a guest. ( logon | register )

EZ Guide 500 NMEA output to AFS
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
torn
Posted 8/29/2007 13:37 (#195145 - in reply to #195092)
Subject: Re: EZ Guide 500 NMEA output to AFS


roaming
If your display is an original Universal Display (5 inch screen with 1 card slot), then you can only update to version 4.7. Version 4.7 still can't understand the NMEA quality messages from high-precision signals, so you're out of luck unless you get a different display.

If your display is a Universal Display Plus, then you can update to v31.4. Depending on the age of the display, you might need a chip update before you can update the firmware. Your dealer will have to do the firmware update. It takes about 30 minutes and he will either have to make a service call or you'll have to take your display to the shop. I think the chip update is about $150. You can update the chip yourself or have the dealer do it.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)