|
NE Saskatchewan | Thanks both Torn and Username -- tried all 3 combines this morning and still having some problems.
When I first start up, the RDI screen shows:
"SRCH SV00 D0P00 WAAS/EGN05 IDLE"
Then 2 machines will pick up the signal in about 10 minutes, the other doesn't pick up at all? Everytime I turn the key off and monitor reboots, it takes the same 10 minutes to find signal.
When it does find signal, here it shows:
"G-3D SV05 DOP06 WAAS"
It seems to find 135 all the time.
Questions:
1) Will it always be using 135? SHould I turn 138 off?
2) Why does it take so long to lock on? And why my one machine not lock on at all? Have cleared the BBRAM several times and reset the config.
3) Why does it always show up SRCH SV00 D0P00 WAS/EGNO5 at start up, and stay there for a long time?
And about the strings, what are they and how would I turn some of them off? Which ones?
Other than that I must say that the Pro600 is definitly a 100% upgrade and look forward to using in other machines than the combine! | |
|
8010 gps problems with pro 600 monitor
