Posted 5/28/2006 21:00 (#15553 - in reply to #15547) Subject: RE: Moving 4020 Rear Wheels
Try taking 3 bolts holding wedges on all way out, 3 on inside 3 on outside. Apply lots of heat, if you get wedge bolts out apply heat directly to wedge and smack axle with sledge. Keep at it, Good luck. When reassembling make sure axle is clean and free of PB. Might want to put new wedges in also.ps, inside wedgge must come out first.
Moving 4020 Rear Wheels
