|
South Australia | Encountered some problems yesterday whilst setting up a ez-guide 500 and ez-steer
The first problem i had was everytime you engaged the ez-steer it would come up with ez-steer bridge fault straight away and tell me increase the overide sensitivity. Doing this had no effect (it wasn't even tring to turn the wheel).
I decided to try running the ez-steer off a battery back, this gave me even weirder result. The screen showed the sprayer doing 360's whilst i drove in a straight line. The Yaw was very high and the filtered heading was going round and round also.
After this i cut the plug off and wired it directly to the vehicles battery although it kept doing 360's.
I had the ez-steer controller solidly mounted with the plugs facing the floor (and correctly calibrated).
I then unmounted the controller and placed it with the plugs facing forward and recalibrated. I was still getting 360's. More restarts then suddenly no 360's, although i have had 1 lower bridge fault.
Has anyone else experienced this? Does anyone have any ideas?
Thanks
Waterbottle | |
|