|
Sunnyvale, CA | the EZ-Guide 500 implemented a number of significant changes with EZ-Steer with T2 in the control algorithms.
1. The EZ-Steer control loop in the EZ-Guide 500 is running at 50 Hz update rate. The original EZ-Guide Plus and EZ-Steer only worked at 5 Hz.
2. The EZ-Guide 500 requires that the T2 be installed in the EZ-Steer controller. The high accuracy gyros, also running at 50 Hz, greatly improve the steering accuracy.
The effect of these EZ-Steer improvements can be easily seen on the EZ-Guide 500 off-line display. | |
|
2nd shot of roundup, should I install the ez steer?
