AgTalk Home
AgTalk Home
Search Forums | Classifieds (7) | Skins | Language
You are logged in as a guest. ( logon | register )

EZG + 4.10 firmware glitch ?
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
alange
Posted 6/11/2007 12:23 (#161106 - in reply to #161080)
Subject: Re: EZG + 4.10 firmware glitch ?


Sunnyvale, CA
the first thing is to accurately measure the distance between the boom wheels and verify the boom wheels are the same distance from the centerline of the vehicle where the GPS receiver is located. On the lightbar, you would then set the implement width to the boom wheels and then set the overlap you wish. If you then drive to a different overlap using the boom wheels, you will then see the gradual build up of difference between GPS and what you drove manually. Unless you drive to the same overlap as your lightbar is set to, it will not match for long, unless you use adaptive curve instead of AB.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)