Had Insight Direct Command hooked to NH3 bar. All looked OK, but couldn't get any flow reading on Insight. I knew flow meter was 100% OK (checked it w/Raven 440) so I gave up & called dealer. Tech guy came out & scratched his head for a bit, then realized that the Inight had been updated (by me) to latest version, but the liquid control module had NOT been updated. When the Insight was hooked to the planter, the liquid control module was not "in the loop".

Updated module & now all is A-OK.

Entering full NH3 tanks into Insight is a little clumsier than into faithful old Raven 440. Maybe I'll get used to it though.