Centre county Pennsylvania, USA | We searched for store bought brackets but couldn't find EZGuide antenna brackets we wanted for 4x30 series Deere tractors. We had to make our own as shown in picture posted under above linked thread .
We used cardboard stencil to mark flat steel, then cut, drill, weld, grind, and paint. Made two alike, one on 4430 and one on 4630. They bolt to metal band below cab roof overhang, as shown in picture. We also drilled hole in metal band and used rubber grommet for EZ antenna coax feed line coming from cab roof compartment as shown in picture. Not sure if Deere 4x50 and above series tractors have same metal band below cab overhang, might need different bolt-on design for those.
EZ antenna bracket project only took couple hours of shop time. Brackets have been trouble free, as has EZGuide/Steer on 4x30 series Deere tractors. |