Near Intersection of I-35 & I-90 Southern Mn. | alange is correct about that cable.
You don't want GPS out to your Raven 440 - you want simulated GPS speed to get into the 440 instead of a radar gun. Raven advertised that the later 440's were GPS compatibile. That means that they can work with other devices that use GPS. They can't do anything with GPS directly. Other Raven models can and do use GPS but not the 440.
The cable I made is esentially a modified copy of the 52033 (I used a 52033 to get the pinouts).
I made deletions and additions for my needs. I didn't need GPS out but did want an implement switch relay and simulated radar out. The connections and relay are housed in a plastic box. A section of cable leads from the 500 to this box. Out of this box are: a 9 pin connector for use by the Keypad, a Conxall connector for speed into a Raven and a Weatherpak Tee for tying into my Remote Raven Master Switch.
My limited testing seems to indicate success.
Edited by tedbear 4/4/2007 07:10
|
EZ 500 Coverage Logging
