|
Sunnyvale, CA | to get power to the EZ-Steer cable (75742), connect the 2-pin connector on 75742 to one of the 2-pin connectors on 67259. this way the EZ-Steer power will be controlled by the CFX-750. Depending on how you wire in 67259 with the ignition, you may have to do something with the 1 pin connectors on 67259. The FMX cable guide will help with these power connections. Take a look at the FMX cable guide, the section on the EZ-Steer in the FMX cable guide applies to your questions.
http://trl.trimble.com/docushare/dsweb/Get/Document-446411/FmX_CblG...
| |
|