|
SW KS, near Dodge City | Go through and turn the flow controller on w/out the product pump running. Turn on the master switch, but don't have the actual product pump running. Rate control warning will be screaming at you, but it might work.
At least that's what I would do. I have no idea if it would actually work, b/c I don't know if the actual rate control is tied into the EZ Boom or not. Or you could just use the headlands pattern & go around the waterways that way. That might work. As a disclaimer, I don't have EZ boom, and very rarely ever get the headlands pattern to actually work right.
Phil | |
|