|
Earth | OK - here's the deal.
If you are using an EZ-Guide+, then you need to use EZ-Steer f/w v3.00.01 (which is currently incorrectly referred to as v3.01 on ez-steer.com).
If you are using an EZ-Guide 500, then you need to use EZ-Steer f/w v4.x (which hasn't been released yet, because the EZ-Guide 500 hasn't been released yet).
If you have an EZ-Guide 500 & an EZ-Guide+ & only 1 EZ-Steer controller, then you can use the EZ-Steer on both - you just need to ensure that you install the correct f/w on the EZ-Steer relative to the EZ-Guide you are using. I think this would become a bit of a chore though, so you'd be better off buying a 2nd EZ-Steer controller... | |
|