AgTalk Home
AgTalk Home
Search Forums | Classifieds (113) | Skins | Language
You are logged in as a guest. ( logon | register )

Raven Smart Trax, cant get it to work
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Applicator
Posted 4/27/2006 23:10 (#8271 - in reply to #8265)
Subject: RE: Raven Smart Trax, cant get it to work


If things are still the same as the first ones, and you have followed the manual exactly and have a 201 hooked to it Raven Standard settings on the 210 output ports will get you a 1 hz update rate. This caused me frustration like you describe, although not on a rogator. A long day later, changing the port used cured it. Newer software versions have the update rate shown on the screen. If this is not your problem, changing the on line toungue length makes a big difference in weaving back and forth. Longer makes it straighter, too long and it will pull to one side if the drag on the tires is not the same left to right. It also helps to tune this for field conditions and speed. As far as finding the next swath you must be heading toward it and within range of the line aquire tongue length when you step on the switch, if you are heading away from the swath, it will never pick it up. Don't throw it in the dumpster if you can't make it work, send it to me freight collect!
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)