|
Bonanza, Or | Maiden voyage with a new to me sprayer today which has a Mid-Tech ARC-6000 controller. It was off by about 3 GPA and I know all the settings are right ( distance cal no., boom width, 20 GPA, ect ect). I programed the flow meter at the number that is on the tag (153.1) which is also the Willmar default number. If you do the math according to the manual 412 Gal indicated / 350 gal used X old cal no. = 180.22 new cal no. So I take it that this new cal no. that is 15% more than the old cal no. will then correct the 15% that the GPA was off ??? I also found on the back cover where someone had written a cal no. of 178.5 so I am assuming I am on the right track?
Thanks | |
|
Mid-tech ARC-6000
