|
| Here is the reply I received from StellarSupport on that error message:
Normally, this occurs when there is an error within the data or the data
was not recorded properly. However, there is no way for us to pinpoint
specific problems with recording due to a number of variables that
effect this.
Sorry, I know this isn't really any help. If your local dealership has an AMS Specialist I would recommend having him come out and diagnose this problem. I would try updating the software on the mass flow sensor. If it doesn't accept an update then you should troubleshoot the wiring or replace the sensor. Right now your best bet may be to wait on the response from Deere's engineers. | |
|
Orig Greenstar Cotton Yld Data
