AgTalk Home
AgTalk Home
Search Forums | Classifieds (43) | Skins | Language
You are logged in as a guest. ( logon | register )

Ez-steer and planting corn?????
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
cbled
Posted 1/18/2007 18:35 (#90571 - in reply to #89963)
Subject: Re: Ez-steer and planting corn?????


It really depends on what else you are planning on doing with the EZ-Steer. If you are going to be planting only, with the EZ-Steer I would suggest that WAAS should be accurate enough for that. If you are going to try and Strip-Till then come back in and plant, I would definetly say that you would want OmniStar HP. It is all a matter of calibrations with the EZ-Steer, you should be able to keep the EZ-Steer within a matter of a couple of inches of the line no matter what signal you are using or up to 4 inches with a 4wd. The only difference is if you want to come back and drive back over the line. I know of several people in eastern CO that are going to be using RTK with their EZ-Steers this year, because of the repeatabiltiy of it. A couple of these people are going to try and cultivate using RTK, it will be very interesting to see if it is going to work or not, I am guessing probably not but I don't know.

Have a good one!
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)