|
NW MN | Do you have a factory Deere ISO connector? If the ISOBUS ECU power is being supplied by the tractor, ISO ADAPTER KIT - INCOMMAND, 4 PIN DEUTSCH 4101318 would work to tee into the ISOBUS either at the IBBC on the back of the tractor or anywhere on the ISO CAN inside the cab.
If you need to supply ECU power it would not work in its direct form without a modification.
Edit to add that ECU power is the red wire on the 4 pin connector. If you have 12v key switched power there now, the above posted cable will work without modification.
Edited by ShopTeacher 10/31/2025 10:36
| |
|
Ag Leader ISO retrofit kit + Z2....display cable???
