|
Central ND | The shear pins are for the auger only, right?So its an auger problem.
>>WHY did you change the auger and did it blow pins before you changed it.Did it get broken or bent up?
AND does the drive style coupler of all the augers still match and interlock after changing it? And do the flighting match together so one flight feeds the next in a smooth transition. They should align with one another.
>>If the flighting on the lower end of the auger are in better condition or larger diameter than the top one is, it will force more grain up to the top one than the top one can remove and bind against the top auger....= broken pins. | |
|
Grain vac Brandt 5200 ex problem
