Posted 6/6/2025 09:15 (#11251448 - in reply to #11250753) Subject: RE: How to tie mapping in JD 2600 to drill on/off switch?
SW MN
The implement switch for 2600 is looking for a ground, do not hook to 12 volts, all you need to do is wire in a common relay that has the 86, 85, 87a, 87 and 30 pins on it. 86 can hook into your 12 volts from your meter clutch switch, 85 to ground, 30 to ground and 87 to the implement switch wire or the white 209 wire
How to tie mapping in JD 2600 to drill on/off switch?
