|
Clifton Kansas | If your guess rows are wide between pass 1 and 2 & then narrow between pass 2 and 3 and that is consistently that way with each pass. Then either your satellite is not in the center of your tractor (if other implements) are not or your planter is pulling to one side.
You need to offset your satellite if all implements are overlapping the same. If only the planter is wide and narrow you need to offset the planter in the planter configuration settings.
Remember to only offset it 1/2 the difference the between the passes. There is an article on Agleaders knowledge base site but I can't find it.
| |
|
Steer Command Z2 poor performance
