|
| Have a articulated tractor that I updated from a paradyme to the Z2 last year.
I fought getting my guess rows to be consistent last year and again this year, I've recalibrated the SCM multiple times and still having a wide guess row one direction and narrow the other direction. The old paradyme always drove right on. I've also noticed the system is almost over sensitive when on rougher/uneven terrain, basically putting a constant wiggle in your rows. Or if you open the cab for and shut it while driving it will cause the tractor to drive off line for a bit. I've looked at their troubleshooting guide for the imu sensor inside and checked the vibration indicator on the diagnostics page and everything seems normal. Ag Leader suggests changing the orientation of the SCM which I'm not convinced is necessary. Starting to wonder if I have a faulty SCM controller. Running rtk on my own base so I know it's not a drift issue. Any thoughts would be appreciated. | |
|
Steer Command Z2 poor performance
