|
Ohio | Have a 600 D series. This winter I replaced 2 hydraulic thumb switches, remotes 2 and 3. Number 2 was acting up when I was tiling last summer. I have remotes 1 and 2 set for continuous flow. Number 2 would just randomly engage on its own at times for some reason. 3 was acting up in the spring but I don't remember what it was doing. So I replaced them both. So last time I was out working ground I try to raise the tool at the end and nothing. Mess with the other ones they work hit one its works. Ok its a fluke works for a round or 2 and again doesn't raise. So I wiggle it back and forth for a bit and got it to work. Ok make another round nothing. So I got mad and when and slide everything over 1 remote. Got my new switch today to put it. What gives with these things? 3 of them to take a **** in 1 year seems a little ridiculous. Is there something in them you can fix they get almost $400 for the damn thing. I haven't taken one apart yet but I keep my old ones I took out this past winter. | |
|
Challenger hydraulic thumb switches
